Features of Rubber conveyor belt edge repairing machine:
1.Rapid heating: from 20 ℃ to 145 ℃ only takes 20-25 minutes;
2.Uniform temperature: heating plate maximum temperature and
minimum temperature difference does not exceed 3 ℃;
3. Rapid cooling: the heating plate from 145 ℃ to 65℃ cooling only
takes 15-20 minutes;
4.Durable High-strength durable aluminum alloy allows maximum
pressure 2.0 Mpa
Application method
1.Fill glue inthe damaged areas that need to be repaired(see the
adhesive part in the vulcanization process of the belt joints, or
the demonstration by our staff when the equipment is being tested);
2.Put the bottom plate, water pressure plate and lower heating
plate under the damaged areasof the belt according to the
structural diagram.
3.Put the upper heating plate,Insulation board on the damaged
areasof the belt.Align the top and bottom plates.
4. Lockedequidistantlythen tighten the bolts.
5.Get the first power wire well connected to electric control box.
Connect the second wire with electric control box and the upper and
down plates.Note that it corresponds to the signon the electric
control box.
6.Connect the end of the high pressure pipe with inlet opening of
water pressure plate. And connect another end of the high-pressure
pipe with water output hole of water pump.Switch on, add pressure
upon vulcanizing machine.
Package of Rubber conveyor belt edge repairing machine:
The normal package is wooden box(Size: L*W*H). If export to
european countries,the wooden box will be fumigated.If container is
too tiger,we will use pe film for packing or pack it according to
customers special request.
Our Services
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
After-Sales Service
* Training how to instal the machine, training how to use the
machine.
* Engineers available to service machinery overseas.
Customer Vistiting
