Customized Conveyor Belt Splicing Joint Hot Vulcanizing Press
Machine
Features of Conveyor Belt Splicing Machine
1. Conveyor blet vulcanizing joint machine is made of aluminium
alloy,small volume and light weight.Three-phase source of power
supply.
2. Water press system can supply stable press.
3. Fast heating, steady heating temperature.
4. Equiped with auto electric control,easy to operate.
Method and Procedure of Conveyor Belt Splicing Machine
Hot vulcanizing is a method of repair that uses both heat and
pressure to join repair materials with compromised sections of the
belt. The belt must be cleaned and free of all oily, greasy
substances before starting.
Typically, the damaged portion of the belt is removed or trimmed
down, and a new section is bonded in its place using an adhesive
like glue or cement. Often, technicians will overuse the adhesive,
subscribing to an “if a little is good, then a lot is better”
approach, but that isn’t necessarily true. The belt is then cured
to bond the materials.
The hot vulcanizing method is ideal for cuts or tears, holes or
breakdowns between steel cords and fabric. It can be executed in
dusty environments and is suitable for all types of belts with
varying widths and thickness.
Machine specification of Conveyor Belt Splicing Machine
| Model | Applied Width(mm) | Motor power | Dimension(LxWxH)(mm) | Weight(KG) |
| ZLJ-800x830 | 800 | 11.2 | 1280x830x630 | 650 |
| ZLJ-1000x830 | 1000 | 14.1 | 1480x830x630 | 700 |
| ZLJ-1200x830 | 1200 | 16.5 | 1680x830x710 | 900 |
| ZLJ-1400x830 | 1400 | 18.6 | 1930x830x760 | 1100 |
| ZLJ-1600x830 | 1600 | 21.1 | 2140x830x800 | 1320 |
| ZLJ-1800x830 | 1800 | 23.3 | 2300x830x850 | 1480 |
| ZLJ-2000x830 | 2000 | 25.6 | 2600x830x950 | 1860 |
Application
Suitable for the jointing in these field: metallurgy, chemical
industry, metal mining, power plant, ports, docks.The surface of
the jointing is smooth,and it can reduce the abrasive and make the
conveyor belt to work for a long time.
When order, pls supply below information, our technician will make
a solution for you, or pls choose one model from bottom traditional
sizes table
- Max belt width
- Heating platen length (or pls supply belt manufacturer’s recommended splice length)
- What kind of belt, light duty belts or heavy duty belts, belt model
No.
- Working Voltage
- Pressure requirements (as our experience, normal is 0.8Mpa, for EP belts is
1.2Mpa, for steel cord belts is 1.4Mpa)
- Degree of heating platen (standard will be 22 degree)
Normal vulcanizer model sheet:
A= Splice Length
B= Bet Width
C=Length of platen along the belt
D= Width of platen
measured square to beltline
E= Bias Ange
F=Width of platen along the belt on bias
Package
The normal package is wooden box(Size: L*W*H). If export to
european countries,the wooden box will be fumigated.If container is
too tiger,we will use pe film for packing or pack it according to
customers special request.
