Specification of Conveyor Belt Vulcanizing Machine
1. Voltage: 220V 380V 415V 525V 660V 1140V 50HZ 60HZ(Customize
available according to your requirement)
2. Quick water cooling device: 15 minutes From 145 ºCdown to 80
ºCor even lower
3.Cooling source: Water or Air
4.Heating source: Electricity
5. Heating time: from room temperature to vulcanization temperature
need less than 20 minutes
6. Heating plate surface temperature difference: ± 1 ºC
7. The temperature adjustment range: 0 ~ 200 ºC(custom)
8. Vulcanization pressure: Max 2.5MPa.
9. Curing temperature: 0 ~ 99min (according to the thickness of the
belt to adjust)
Usually 10mm~25mins, 20mm~35mins
10. Automatic mute pressure pump
11. Automatic control panel: insulating and waterproof, security
alarm, Auto power-off when reach the vulcanization temperature.
Upgrading explosion proof control box option available.
When order, pls supply below information, our technician will make
a solution for you, or pls choose one model from bottom traditional
sizes table
- Max belt width
- Heating platen length (or pls supply belt manufacturer’s recommended splice length)
- What kind of belt, light duty belts or heavy duty belts, belt model
No.
- Working Voltage
- Pressure requirements (as our experience, normal is 0.8Mpa, for EP belts is
1.2Mpa, for steel cord belts is 1.4Mpa)
- Degree of heating platen (standard will be 22 degree)
Normal vulcanizer model sheet:
A= Splice Length
B= Bet Width
C=Length of platen along the belt
D= Width of platen
measured square to beltline
E= Bias Ange
F=Width of platen along the belt on bias
Technical Parameters (Reference)
Model
| Applied Width(mm) | motor power | Dimension(LxWxH)(mm) | Weight(KG) |
ZLJ-800x830 | 800 | 11.2 | 1280x830x630 | 650 |
ZLJ-1000x830 | 1000 | 14.1 | 1480x830x630 | 700 |
ZLJ-1200x830 | 1200 | 16.5 | 1680x830x710 | 900 |
ZLJ-1400x830 | 1400 | 18.6 | 1930x830x760 | 1100 |
ZLJ-1600x830 | 1600 | 21.1 | 2140x830x800 | 1320 |
ZLJ-1800x830 | 1800 | 23.3 | 2300x830x850 | 1480 |
ZLJ-2000x830 | 2000 | 25.6 | 2600x830x950 | 1860 |
The normal package is wooden box(Size: L*W*H). If export to
european countries,the wooden box will be fumigated.If container is
too tiger,we will use pe film for packing or pack it according to
customers special request.
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
After-Sales Service
* Training how to instal the machine, training how to use the
machine.
* Engineers available to service machinery overseas.
